XP-2
10 m3/s (20,000 CFM) Mobile, Electric, Skid, Dust Collector
XP-2. Overview.
The XP-2 (10m3/s, Mobile, Electric, Skid) dust collector was originally designed for tunnel cross passage construction and sites with restricted access.
The XP-2 is a complete dust collection systems featuring a dirty air intake, filter house, clean air box, silencer, exhaust, dust discharge system and 55kW centrifugal fan mounted on a single drag skid base create 10 m3/s (20,000 CFM) @ -2.5 kPa.
Efficiency. Power.
One of the key features of the XP-2 is the inclusion of a Variable Frequency Drive (VFD) as part of the standard configuration. The VFD ensures the dust collector provides the required air flow using the least amount of power. If there is insufficient air flow, the air flow meter on the dust collector will turn up the VFD to generate more air volume. Equally the air flow meter will turn down the VFD so the dust collector uses less kW for the same amount of volume depending on the temperature and conditions. This makes the units power efficient, and clients have reported they have been able to reduce their power consumption by up to 40%.
Investment Options. Purchase or Rental.
We can offer purchase and rental opportunities for short-medium-long-term hire.
XP. Range Options.
XP-2
10m3/s, Mobile, Electric, Skid Dust Collector
Mobility. Skid or Castor Wheel.
The XP-2 (10 m3/s, Mobile, Electric, Skid) dust collector is a complete dust collection system mounted on a compact, skid base.
Dust collectors mounted on a skid base offer a cost-effective option when dust collection needs are relatively static. The skid can be dragged into position using the four rigging mounts at each end of the machine or moved by crane using the four lifting lugs.
When units need to be repositioned there is limited downtime in construction works as the complete unit can be moved easily.
Optional Configuration: Castor-Wheels
Compressed rigid castor-wheels can be added to either unit to allow further ease of movement by sliding. Castor Wheels can be supplied with or without brakes and customised to fit utility platform rails if required.
Power. Electric
The 10-XP (10m3/s, Mobile, Electric, Skid) dust collector uses 380-480V to power the 55kW centrifugal exhaust fan, whilst hydraulics are used to power the auger and rotary valve discharge system.
Size. Key Dimensions.
- Height: 2,770 mm (109.1 in)
- Width: 1,833 mm (72.2 in)
- Length: 5,050 mm (198.9 in)
- Mass: 5,500 kg
XP-2. Key Features.
Air Volume:
10 m3/s (20,000 CFM)
Centrifugal Fan:
55 kW (75 hp)
Power:
415 V-3Ph-50 Hz
Variable Frequency Drive
Air Intakes:
1 x 800 mm (31.5 in) Ø
Filtration System:
Filters: 12
Filter Surface Area: 252 m2 (2,712ft2)
Filter MERV Rating: 15
(see Note 1)
Dust Discharge System:
Hydraulic Reversible Incline Auger
Auger Orientation: Front Only
Control and Monitoring System:
CANbus PLC
Touch-Button Display
Safety Features:
1 x Emergency Stop
Note 1: During normal operation dust collectors achieve a filtration efficiency better than installed filter MERV rating due to dust cake build-up on filter media. Dust cake efficiency is dependent on dust type, particle sizes etc. Efficiencies of 99.99% at 0.067 micron have been achieved.
Image Gallery
More Information? Contact Us.
If you would like more information on the XP Range or any of our mobile dust collectors, please complete the form below.
We try to respond to requests on the same business day, however if your enquiry is urgent please call our team on +1 (778) 897 2229. Our office hours are between 07:00 and 17:00 Monday to Friday.